With the development of science and technology, have you found many small household appliances around us in recent years? Compared with the traditional TV, refrigerator, air conditioner and washing machine, which have brought us great convenience, the new smart appliances have also given us a lot of help. Although the popularity is not high, with the development of smart home and the improvement of artificial intelligence technology, they will become an indispensable right-hand assistant in the family. Cleaning robots are an important member of the clean environment. In order to liberate both hands and feet, they will continue to improve. So, what are the troubleshooting and solutions for the cleaning robot? Let's have a look!

The increase of household appliances has also brought another problem. That is, our maintenance costs will rise. Manufacturers are receiving after-sales service with late warranty, but sometimes they will use it as soon as possible or have too much warranty. The cost of repairmen is generally not cheap. (I already knew that I applied for college, haha) electrical appliance Xiaobai, who doesn't know anything, has become a profiteer's pit. Obviously, there is no problem. I'll solve it for you. Therefore, it is necessary to eliminate small faults and problems by yourself.

1. The cleaning robot suddenly stopped in operation

(1) Check whether the machine runs out of power. When the machine runs out of power, it will shut down automatically. At this time, it needs to be charged manually.

(2) Check whether the machine works in the fixed-point mode. After 10 minutes in the fixed-point mode, the machine stops working and will be reused later.

2. Preventing the cleaning robot from falling is ineffective or ineffective

(1) In order to confirm that the step height is above 8cm, otherwise it may affect its action, indicating that it is not a fault.

(2) Secondly, where the sensor at the bottom of the machine is not dirty, there is a shelter, the mechanical part becomes smooth and the light is strong, the function of preventing overturning may become worse, so please control the brightness of the light.

(3) In addition, please do not stack fragile items on the floor or under the steps where the machine is working in the strong sunlight or the machine is cleaning. Please do not let the machine fall with a small probability due to the impact of the environment.

3. The cleaning robot can't be recharged after being put away for a long time

If the machine is placed for more than a month, it cannot be powered on. Charge the host, and soon the green disappears. Notice that it is fully charged, and it will run out of power as soon as it works.

(1) Charge the host directly with the adapter, even if the green disappears, it still needs to be charged for 1 hour. In this case, use the small battery to charge and activate the battery. After one hour, the machine will stop charging for one minute.

(2) If the host is recharged, it can be charged normally. If not, add another hour, activate the battery again, repeat three times, and you can fully activate the battery and return to normal.

The above is about the troubleshooting and solutions of cleaning robot. It is easy to diagnose these faults and repair them by ourselves. If we know these, we can save a lot of maintenance costs. If the machine fails seriously, it is recommended to go to the manufacturer's fixed repair shop for repair.